The pool of your home provides you with entertainment and quality time with your family. Here you enjoy games and relax, as your swimming area is both an emotional and financial investment. You brush the tiles, maintain the water chemistry, resurfacing, etc. But do you know that drawing and refilling are the most essential part of ongoing pool maintenance?
Before you drain and refill water in your pool, however, you should consider reading this article and learn why draining is necessary. You might think that it will increase your water bill. But when you will learn about its valid reasons, there are fewer chances of skipping the draining water from your pool. Below, we have mentioned some legitimate reasons, have a look at them.
Dry climate: The climate varies from location to location. And, the locations that have drier climate causes the water in the pool to evaporate. The hotter the climate, the less water in your swimming pool. Clearly, you have to fill it. And, if you do not do so, the water level drops to such a level that it becomes hard. As a result, maintaining the chemical balance of the swimming area becomes even more challenging. In such a situation, you can add water to the pool and add chemicals to balance the water and maintain a safe balance. Draining and filling it with fresh water is quite inexpensive than continuing to add chemicals such as chlorine and sodium bicarbonate.
Routine cleaning: Neglecting the pool causes a number of health problems to the swimmers such as hepatitis A, cryptosporidium, Giardia, Shigella, norovirus, and E. coli. And, you do not want your family to get hold of any of them. Right? This is why experts recommend complete pool maintenance every year. For example, the pool water in your swimming pool uses the salt cells to produce its own chlorine. To avoid the poor generation of chlorine and insufficient filtration it is important to clean it. You can give it a fresh start by draining all of the water in the pool.
Eliminates Total Dissolved Solids (TDS): The total dissolved solids determine all the soluble substances that are present in your pool water. The remains left by the addition of the chemicals to the pool results in the formation of TDS. In other words, it is the debris, dirt, germs, and bacteria. When you measure the TDS of the pool, it includes the evaluation of the electrical conductivity of the water. It should not be more than 1500ppm. And, if it has a greater value than that, you might see cloudy water forming stains and scaling on the surfaces. The best way to get rid of increased TDS is by draining the water and refilling it with new water.
Resurfaced Pool: Change in the climate or hotter weather, fade away the color of your pool. If it is faded, it needs to be painted or completely resurfacing. This needs inspection and draining to start with the resurfacing process.
Leaving your pool undrained for a long period of time can remove all the stains and take care of all other fixings. But, we suggest you rely on professional services if you are unaware of the draining and refilling process.